
[About Twain]

The Twain provides in the TWAIN utility function.
In this function, you can scan image to PC to store file or send as attached file by e-mail.

The TWAIN Driver Installation Guide

On Windows 95, 98, Win 2000, NT 4.0

1. Start Windows 95, 98,Win 2000, NT4.0
2. Insert CD-ROM into device.
3. The autorun installation menu will appear on the screen.
4. Select the installation language then select Twain then press OK to start installation

How to setup the Driver

When you run a program supported TWAIN_32 function, the program will launch
the TWAIN_32 Driver Interface. You can press SETUP. Then you will see a small
window, you can select the COM-port, and set the baud rate. When you finish 
the setting, please press "OK" to return the main screen.

How to see the help file

Please press the help button to see the help.

How to use the driver:

1. After correctly installed the Driver, try using anyone application to activate the TWAIN Driver
   by selecting "Select Source." When a dialog box appears choose the driver and close this dialog box.

2. Click Acquire function in the application will launch TWAIN_32 Driver Control Panel.

3. After finishing all the selections scan directly.

  *If the machine has no reaction, please make sure the COM-port is connected
   correctly, or an error message not appears on the machine display.

4. Microsoft Photo Editor included in MS-Office 97 and Photo Document Image do
   not support multi page scanning. If you are using these products,you have
   to start the TWAIN driver again after each page. The actual scanned page
   out of a multi page scan session will remain in the feeding section until
   the next page will be scanned. The last page will come out right away.

NOTE: 1. Twain function cannot work when Fax machine display "Access No.=---" ("ID No.=---") message,
	 please enter correct password or change from copy mode to Fax mode.
      2. Imaging of Windows NT4.0 does not support Twain scan.

RS232 Interface Specification:

1. Speed 
   19200 bps or 38400 bps 

2. Flow control
   Hardware control

3. Type of RS232-C 
   9 pin D-type 

   
[About LSD]

This software utility provides one easy way to set up following functions.

1. Setup One touch dial, Speed dial, Group dial for fax and e-mail location including
   telephone number, remote side's name and mostly the long e-mail name and address.

2. Shows machine counter and status.

3. Shows machine trouble status.

This machine has a standard RS232-C interface, through this port, above functions can be
done by PC utility software.


LSD Driver Installation Guide :

On Windows 95, 98, Win 2000, NT 4.0

1. Start Windows 95, 98, Win 2000, NT 4.0
2. Insert CD-ROM into device.
3. The autorun installation menu will appear on the screen.
4. Select the installation language and select LSD, then press OK to start installation.


How to see the help file :

Please press the help menu to see the help in the utility.


How to use the driver :

Click [Start] button, go to [Program], then select the utility to activate LSD function.

* If the machine has no reaction, please make sure the COM-port is connected correctly, or
  an error message not appears on the machine display.



 